Do you want to remove the start of a recording, shorten an uploaded video, or keep only a segment? To cut an MP4 video without losing quality, the method is to export the clip without re-encoding the video and audio tracks. A tool like LosslessCut can do this on compatible files.
However, there is a limit: a cut without re-encoding doesn't always start exactly on the chosen frame. Here's how to prepare your file, select a segment, and check that the result meets your needs.
How can I trim an MP4 video without re-encoding it?
The most direct method is to open the video in LosslessCut, set the start and end of the section to keep, then export that segment without re-encoding.
- Keep a copy of your original video.
- Open the file in LosslessCut.
- Set the start point of the segment to keep.
- Set its end point.
- Check that the selected segment matches the part you want to keep.
- Export the file, then check the first few seconds and the audio.
This operation shortens the video. It does not automatically reduce its resolution or re-compress the images when the export copies the original tracks.
Cutting a video vs compressing a video: what's the difference?
Cut a video involves removing part of its duration. For example, you keep two minutes of a ten-minute recording.
Compress a video involves changing its encoding to reduce its file size. This can mean a lower bitrate, a different resolution, or another codec.
A cut without re-encoding preserves the data of the kept segments. By contrast, a standard export from editing software may re-render all frames, even if you only removed a few seconds.
If your goal is mainly to get a smaller file while keeping its duration, see our guide to Reduce the size of an MP4 video without significantly degrading quality.
Step 1: Prepare the video file
Before trimming your video, open it in your usual player. Make sure the picture displays correctly, the sound works, and playback reaches the end of the file.
If the video comes from a download, wait for it to finish. A cut won't repair an incomplete or corrupted file.
- Work with a file stored locally on your computer.
- Keep enough free space to save the new clip.
- Keep the original until you have approved the final result.
- Note the approximate times of the segment to keep.
For example, if the useful section starts at 2:15 and ends at 4:40, note those two timecodes before you begin. You can then refine your selection in the software.
Step 2: open the video in LosslessCut
Download LosslessCut from the links on the official project, then launch the application corresponding to your system.
Drag your video into the program window or use the Open File command. The video appears with a playback bar that lets you navigate the recording.
Button labels and layout may vary by app version and language. Mainly, look for the controls that set the start and end of the segment.
Step 3: select the segment to keep
Move the cursor to the start of the desired passage and set that moment as the segment's start point. Then do the same for its end.
Listen a few seconds around the two markers. A cut placed in the middle of a word, movement, or demonstration can make the clip hard to understand.
To keep only one segment, make sure a single useful segment is selected. Also check the selection mode: the software should export the portion you want to keep, not the parts you want to remove.
Example: to remove an introduction and a conclusion, select only the middle part. This gives you a new clip without modifying your source file.
Step 4: export the video clip
Start the export and check the destination folder, the file name, and the output format. For a first test with a compatible MP4, keep that format and the cut settings without re-encoding.
Use a descriptive name, for example tutoriel-extrait-02m15-04m40.mp4. This allows the excerpt to be immediately distinguished from the full video.
The time required depends in particular on the size of the segment and the speed of the storage. Copying the tracks avoids recalculating a new compression, but a large file still takes time to read and write.
Why does the video start slightly before the chosen point?
Many video formats use keyframes. These images serve as reference points for decoding neighboring images.
When cutting without re-encoding, the start of the clip often has to align with a keyframe near the selected point. The exported file may therefore begin slightly before the expected moment.
This behavior doesn't necessarily mean your selection is incorrect. It stems from a limitation of trimming without re-encoding on some files.
To improve the result, try placing the start on a nearby keyframe, export a short clip and check it. If you need to start exactly on a specific frame, an export with re-encoding may be necessary.
How can I check that the trim was successful?
Open the exported file in a player independent of the editing software. The project preview is not sufficient to validate the final result.
- Start: does the passage start at the right time ?
- End: is the final sentence or movement complete?
- Audio: Is the correct audio track present?
- Synchronization: Does the voice match the lip movements?
- Playback: does the clip work on the device it’s intended for?
If playback is already stuttering, our guide on the videos that stutter or freeze can help you distinguish a file issue from a player issue.
Will the trimmed video be smaller?
In general, keeping a shorter duration reduces file size. However, the result isn't always directly proportional to the number of seconds removed.
A highly detailed scene can use more data than an almost still scene. Audio tracks, subtitles, and container metadata also affect the final file size.
To obtain a much lighter file while preserving a long duration, consider using compression suited to your needs.
Mistakes to avoid
- Deleting the original too soon: Wait until you've verified the exported file.
- Mixing up Keep and Delete: control the selection mode before export.
- Expect a cut that's always frame-accurate: keyframes sometimes require an offset.
- Simply change the extension: Renaming a file does not convert its contents.
- Export multiple times with compression: start from the original if a new encoding is necessary.
- Add effects without adapting the method: an embedded text or a transition usually requires re-rendering the affected frames.
FAQ: cut an MP4 video without losing quality
Can you cut a video without re-encoding it?
Yes, for compatible files. The software copies the retained segments into a new file. Cut points may, however, be limited by the position of keyframes.
Do you need to upload the video to a website ?
No. With a local app like LosslessCut, you open the file on your computer and export the clip to your storage.
Can trimming improve a blurry video?
No. A cut without re-encoding preserves the quality of the original segment. It does not recreate missing details and does not increase the actual resolution of the image.
Why does my clip no longer have sound?
Check the tracks selected for export, then try another player. If the problem persists, consult our article on the downloaded videos without audio.
Can you trim a video retrieved with All-Downloader?
Yes, if you have a compatible local file and the necessary rights to modify it. Downloading and trimming are two separate operations: All-Downloader offers the available options for supported links, then the trimming software works on the resulting file.
Choose between preserved quality and precise trimming
To remove an intro or quickly extract a segment, start with a cut without re-encoding. Then check the start, end, and synchronization of the exported file.
If your edit requires frame-accurate precision or visual effects, use an export with appropriate re-encoding. In any case, keep your original video so you can resume work.